Quality first, Best credit, Clients supreme
|
Product Details:
Payment & Shipping Terms:
|
| Name: | Printing 20cm Decorative PVC Panels Without Leak For Office Ceiling | Treatment: | Printing |
|---|---|---|---|
| Dimension: | 8 Inch Width; 7mm, 7.5mm, 8mm Thickness | Surface: | Middle Groove |
| Weight: | 2.3-3kg/m2 | Advantage: | Avoid Leaks |
| Highlight: | decorative tile panels,pvc marble wall panels |
||
White Printing 20cm Pvc Decorative Panels Without Leak For Office Ceiling
PVC Panel Introduction:
PVC panel is made from a robust plastic material, we call that polyvinyl chloride (PVC). It's a cost efficient alternative to regular ceilings, not only its attractive, last for years and require almost no maintenance, but also it offers a huge variety of colors and designs.
PVC Panel Specification:
Width × Thickness: 200*7mm; 200*7.5mm; 200*8mm
Weight: 2.3kg/sqm; 2.5kg/sqm; 2.6kg/sqm; 3kg/sqm
Length: 5.8m, 5.9m, 5.95m, customized
PVC Content: 40%-50%
Type: Middle groove surface
Pattern: Normal printing
Packing: 10pcs/bag
PVC Panel Advantages:
|
Advantages |
|
PVC panels do not expand, contract or warp when they come into contact with water, so they will be a good wall and ceiling choice for bathroom.
|
2. Material-recyclable |
PVC panels can be taken to any plastic recycling facility, or we can smash it, and reproduce the pvc panel.
|
|
3. Cost-effective |
We can save a lot of labor and installation costs, because pvc panel is easy to install during the process of installing pvc panels. The prices of pvc panels are very economical even when compared to the other alternatives available in the market and apart from this deliver many other advantages.
|
|
|
4. Maintenance-friendly
|
Easy maintenance only remove the sheets you want to replace if you have a water leak or leak and go. |
|
5.Ease of installation |
|
PVC Panel Installation Instructions:
1. Make sure your brandering is 500mm maxmum apart.
2. Line brandering up, level/horizontal
3. PVC ceiling panels can be fitted onto 38mm*38mm wooden brandering with screw or staple gun. Steel brandering can also be used.Drill a 3.5mm hole into the brandering,then screw 4.5mm*15mm screw into it.
4. Screw your pvc ceiling panel onto the brandering. The panels must lay in the same direction as the main trusses.
5. Make sure the screw head fasten properly and flush with the groove of ceiling panel.
6. Clip the second panel with the tongue onto the groove of first panel.
7. Knock panel gently on the side to secure close fitment. Do not carry on until the panel is fitted correctly.
8. In order to fit the last panel, cut the panel in the length with a carpet knife.
9. Close the corners with cornice
10. Dust ceiling with a cloth after fitment is done.
PVC Panel Packing:
PVC Panel Fire Test Report:
|
|
V03-1400169 | Specification | 200mm | ||||
|
|
PVC Wall & ceiling Panel | Standard | BS EN 13501-1:2014 | ||||
|
|
Measure Unit | Technical Requirement | Test Results | Individual Judgment | |||
|
|
W/s | C | ≤250 | 102 | Compliant | ||
|
|
m | Yes | Compliant | ||||
|
|
MJ | ≤15 | 10.5 | Compliant | |||
|
|
Surface | mm | ≤150 | 30 | Compliant | ||
| Edge | 32 | Compliant | |||||
|
|
m2/s2 | S2 | ≤180 | 172 | S3 Compliant |
||
|
|
m2 | ≤200 | 166 | ||||
|
|
------ | d0 | No flaming droplets/particles occur within 600s |
Yes | Compliant | ||
|
|
------ | No ignition of the filter paper | Yes | Compliant | |||
|
|
The combustion performance of sample is Satisfied BS EN 13501-1:2014 about grade C-s3, d0. |
||||||
PVC Panel Showing:
Contact Person: Miss. Abby
Tel: 86-18357305069
Fax: 86-573-8780-5310
